Articles de revues avec comité de lecture

Attention: open in a new window. PDFPrintE-mail

87. Wu, D., W.-D. Ding, A. Koubaa A, Chaala, C.-C. Luo. 2017. Robust DEA to Assess the Reliability of Methyl Methacrylate-Hardened Hybrid Poplar Wood. Annals of Operations Research, 248:515–529.

86. Soucy, J., F. Godard, B. Riedl, P. Rivard, A. Koubaa. 2016. Étude du comportement rhéologique des composites bois-polymères chargés de résidus papetiers Rhéologie, 30 :1-15.

85. Haddar, M., A. Elloumi, A. Koubaa, C. Bradai, S. Migneault, F. Elhalouani. 2016. Effect of high content of deinking paper sludge (DPS) on the reinforcement of HDPE. Journal of Polymers and the Environment (JOOE), publié en ligne: DOI: 10.1007/s10924-016-0837-9.

84. Cáceres C.B., R.E. Hernández, S. Kuljich, and A. Koubaa. 2016. Effects of commercial thinning, log position in the stem, and cutting width on the surface quality of cants produced by a chipper-canter. Wood Material Science & Engineering. In press, http://dx.doi.org/10.1080/17480272.2016.1232308.

83. Koohestani, B., T. Belem, A. Koubaa, B. Bussière. 2016. Experimental investigation into the compressive strength development of cemented paste backfill containing Nano-Silica. Cement and Concrete Composites 72:180-189

82. Koohestani, B., A. Koubaa, T. Belem, B. Bussière, H. Bouzahzah, 2016. Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler. Construction and Building Materials 121 (2016) 222–228.

81. Smith, J., B.D., Harvey, A. Koubaa, S. Brais, M.J. Mazerolle. 2016. Sprucing up the mixedwoods: Growth response of white spruce (Picea glauca) to partial cutting in the eastern Canadian boreal forest.  Canadian Journal of Forest Research, 46(10): 1205-1215.

80. Kada, D., A. Koubaa, G. Tabak, S. Migneault, A. Boudenne, B. Garnier. 2016. Tensile properties, Thermal Conductivity and Thermal Stability of Short Carbon Fiber Reinforced Polypropylene Composites. Polymer Composites. Publié en ligne le 6 juin 2016: DOI: 10.1002/pc.24093.

79. Kada, D., S. Migneault,G. Tabak, A. Koubaa. 2016, Physical and Mechanical Properties of Polypropylene-Wood-Carbon Fiber Hybrid Composites. Bioresources 11(1), 1393-1406

78. Dairi B., H. Djidjelli, A. Boukerrou, S. Migneault, A. Koubaa. 2015. Morphological, Mechanical and Physical Properties of Composites made with Wood Flour-Reinforced Polypropylene/Recycled Poly(ethylene terephthalate) Blends. Polymer composites. Online: DOI: 10.1002/pc.23745

77. Cáceres, C.B,, R. E. Hernández, A. Koubaa. 2016. Effects of log position in the stem and commercial thinning on jack pine chip dimensions produced by a chipper-canter. European Journal of Wood and Wood Products. DOI 10.1007/s00107-016-1062-x.

76. Soucy, J., A. Koubaa, S. Migneault, B. Riedl. 2016. Chemical composition and surface properties of paper mill sludge and their impact on High Density Polyethylene (HDPE) composites. Journal of Wood Chemistry and Technology, 36(2): 77-93.

75. Cáceres, C.B., R.E Hernández,.A. Koubaa. 2016. Effects of log position in the stem and cutting width on size distribution of black spruce chips produced by a chipper-canter. Wood and Fiber Science 48(1): 1-18.

74. Nejad, M., P Cooper, V Landry, P Blanchet, A Koubaa. 2015. Studying dispersion quality of nanoparticles into a bio-based coating. Progress in Organic Coatings 89, 246-251

73. Moulinier J., S. Brais, B.D. Harvey, A. Koubaa. 2015. Response of Boreal Jack Pine (Pinus banksiana Lamb.) Stands to a Gradient of Commercial Thinning Intensities, with and without N Fertilization. Forests 6: 2678-2702.

72. Ouertani, S., L. Hassini, S. Azzouz, S. S. Torres, A. Belghith, A. Koubaa. 2015. Modeling of combined microwave and convective drying of wood: Prediction of mechanical behavior via internal gas pressure. Drying Technol. 33(10): 1234-1242

71. Migneault, S., A. Koubaa, P. Perré, B. Riedl. 2015. Effects of wood fiber surface chemistry on strength of wood-plastic composites. Appl. Surface Sci. 343: 11–18.

70. Payette, M., T. Work, P. Drouin, A. Koubaa. 2015. Efficacy of microwave irradiation for phytosanitation of wood packing materials. Industrial Crops and Products, 69:187 - 196.FRQNT

69. Ouertani, S., A. Koubaa, S. Azzouz, L. Hassini, K. Ben Dhib, A. Belghith. 2015. Vacuum contact drying kinetics of Jack pine wood and its influence on mechanical properties: Industrial applications. Heat and Mass Transfer. 51:1029–1039

68. Cáceres, C. B, R. E. Hernández, A. Koubaa. 2015. Effects of the cutting pattern and log provenance on size distribution of black spruce chips produced by a chipper-canter. . Eur. J. Wood Prod. 73(3):357-368

67. Mvolo, C-S, A. Koubaa, J. Beaulieu, A. Cloutier, M. Mazerolle. 2015. Variation of wood quality in white spruce (Picea glauca (Moench) Voss). Part I. Defining t«he juvenile-mature wood transition from tracheid length. Forests 6(1):183-202CRSNG

66. Mvolo, C-S, A. Koubaa, M. Defo, J. Beaulieu, M.-C. Yemele, A. Cloutier. 2015. Prediction of tracheid length and diameter in white spruce. IAWA J., 36 (2):186-207.

65. Passarini, L., R. Hernández, A. Koubaa. 2014. Effects of temperature and moisture content on selected wood mechanical properties involved in the chipping process. Wood Science and Technology. 48:1281-1301.

64. Erchiqui, F., Z. Annasabi, A. Koubaa, D. Kocaefe, F-S.Hasnaoui, A. Imad. 2014. Numerical Investigation ON Phytosanitary Treatment OF Frozen Wood Using Microwave Energy. Can. J. of Chem. Eng. 92(11): 1859–1864,

63. Bouslimi, B., A. Koubaa, Y. Bergeron. 2014. Anatomical Properties in Thuja occidentalis L. IAWA J. 35 (4):363 - 384

62. Soucy, J., A. Koubaa, S. Migneault, B. Riedl. 2014. The potential of paper mill sludge for wood plastic composites. Ind. Crops and Products: 54 : 248–256

61. Ouertani S., S. Azzouz, L. Hassini, A. Koubaa, A. Belghith. 2014. Moisture sorption isotherms and thermodynamic properties of Jack pine and palm wood: Comparative study.  Ind. Crops and Products. 54:200-210.

60. Bouslimi, B.,A. Koubaa, Y. Bergeron. 2014. Effects of Biodegradation by Brown-Rot Decay on Selected Wood Properties in Eastern White Cedar. Inter. Biodet. & Biodeg., 87 : 87-98

59. Hernández, R., A. M. Llavé Campos, A. Koubaa. 2014. Effects of cutting parameters on cutting forces and surface quality of black spruce cants. Eur. J. Wood Prod. 72 (1):107-116.

58. Migneault, S., A. Koubaa, P. Perré. 2014. Effect of fiber origin, proportion and chemical composition on the mechanical and physical properties of wood plastic composites. Journal of Wood Chemistry and Technology, 34:(4) 241-261.

57. Huda, A. ASM, A. Koubaa, A. Cloutier, R.E. Hernández, Y. Fortin, 2014.Variation of the Physical and Mechanical Properties of Hybrid Poplar Clones. BioResources 9 (1): 1456-1471.

56. Koubaa, A, P. Saranpää. 2014. Introduction to special Issue of the CJFR on Wood Qual;ity, IUFRO Division 5 Conference, Estoril, Portugal, 8-13 July 2012. CJFR 44(2):1.

55. Hernández, R., Kuljich, S., O. Naffeti, A. Koubaa. 2013. Effect of the cutting speed on the surface quality of black spruce cants produced by a chipper canter. For. Prod. J. 63(1/2): 39-46

54. Bouslimi, B., A. Koubaa, Y. Bergeron. 2013. Variation of brown rot decay in eastern white cedar (Thuja occidentalis L.). BioResources 8(3):4735-4755.

53. Xing, S., B. Riedl, J. Deng, H. Nadji, A. Koubaa. 2013. Potential of pulp and paper secondary sludge as formaldehyde scavenger and co-adhesive for particleboard manufacturing. Eur. J. Wood Prod. Eur. J. Wood Prod. 71 (6): 705–716..

52. Bouafif, H., A. Koubaa, P. Perré, A. Cloutier. 2013. Creep Behavior of HDPE/Wood Particle composites. Sous-presse, IJMMP, 7(4): 20 pages. CRC, MDEIE

51. Erchiqui, F., Z. Annasabi, A. Koubaa, F.-S. Hasnaoui, H. Kaddami.. 2013. Numerical Modeling of Microwave Heating of Frozen Wood. Can. J. of Chem. Eng. 91:1582–1589FQRNT

50. Kuljich, S., R.E. Hernández, ,A. M. Llavé Campos, A. Koubaa. 2013. Effects of cutting direction, rake angle and depth of cut on cutting forces and surface quality when machining balsam fir. Wood and Fiber Science, 47(2):195-205.

49. Ding, W., A. Koubaa, A. Chaala. 2013. Mechanical properties of MMA-hardened hybrid poplar wood. Industrial Crops and Prod. 46 (4): 304-310CRC, MDEIE

48. Belkhir, S, A. Koubaa, A. Khadhri, M. Ksontini, H. Nadji, S. Smiti, T. Stevanovic. 2013. Seasonal effect on the chemical composition of the leaves of Stipa tenacissima L. and implications for pulp properties Ind. Crops Prod. 44:56-61.CRC-TUN

47. Ngueho Yemele, M.C., A. Koubaa, A. Cloutier, P. Soulonganga, T. Stevanovic, M. Wolcott. 2013. Effects of hot water treatment of raw bark, coupling agent, and lubricants on properties of bark/HDPE composites. Ind. Crops Prod. 42:50–56FQRNT, CRSNG

46. Zerhouni, A., T. Mahmood, A. Koubaa. 2012. The use of paper mill biotreatment residue as furnish or as a bonding agent in the manufacture of fibre-based boards. J-For. 2(2):19-24

45. Huda, A., A. Koubaa, A. Cloutier, R. Hernandez, P. Périnet. 2012. Anatomical properties of selected hybrid poplar clones grown in southern Québec. BioRes 7(3):3779-3799

44. Fang, C.-H., A. Cloutier, P. Blanchet, A. Koubaa, A. 2012. Densification of wood veneers combined with oil-heat treatment. Part II: Hygroscopicity and mechanical properties. BioResources. 7(1), 925-935.

43. Ding, W.-D., A. Koubaa, A. Chaala. 2012. Dimensional stability of methyl methacrylate hardened wood. Minor revision. Bioresources. 7(1):504-520.

42. Belkhir, S, A. Koubaa, A. Khadhri, M. Ksontini, S. Smiti. 2012. Variations in the morphological characteristics of Stipa tenacissima fiber: the case of Tunisia. Ind.l Crops Prod. 37:200-206.

41. Xing, S., B. Riedl, A. Koubaa, J. Deng. 2012. Mechanical and physical properties of particleboard made from two pulp and paper mill secondary sludges. World J. of Eng. 9(1):31-36

40. Koubaa, A., W.-D. Ding, A. Chaala, H. Bouafif. 2012. Surface properties of MMA-Hardened hybrid poplar wood. J. Appl. Polymer Sci., 123 (3) :1428-1436.

39. Fang, C-H, N. Mariotti, A. Cloutier, A. Koubaa, P. Blanchet. 2012. Densification of wood veneers by compression combined with heat and steam. Eur. J. Wood Prod. 70:155–163FQRNT

38. Pedieu, R., A. Koubaa, B. Riedl, X.-M. Wang, J. Deng. 2012. Fire-retardant properties of wood particleboards treated with boric acid. Eur. J. Wood Prod. 70:191–197FQRNT

37. Vincent, M., C. Krause, A. Koubaa. 2011. Variation in black spruce (Picea mariana (Mill.) BSP) wood quality after thinning. Annals of Forest Science 68 (6):1115-1125FQRNT

36. Diouf, P. N., T. Stevanovic, A. Cloutier, C.-H. Fang, P. Blanchet, A. Koubaa, N. Mariotti. 2011. Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers. Applied Surface Science, 257:3558-3564FQRNT

35. Migneault, S., A. Koubaa, B. Riedl, H. Nadji, J. Deng, S.Y. Zhang. 2011. Binderless Fiberboard made from primary and secondary pulp and paper sludge. Wood Fiber Sci 43(2): 180-193

34. Migneault, S., A. Koubaa. B. Riedl, X.-M. Wang, J. Deng. 2011. Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins.  Holzforschung. 65 :403-409.

33. Fang, C-H, A. Cloutier, P. Blanchet, A. Koubaa, N. Mariotti. 2011. Densification of Wood Veneers Combined with Oil-Heat Treatment. I: Dimensional Stability. Bioresources: 6(1):375-385. ,

32. Migneault, S.,A. Koubaa, F. Erchiqui, A. Chaala, K. Englund, M. P. Wolcott, 2011. Application of micromechanical models to tensile properties of wood–plastic composites. Wood Science and Technology 45:521-532

31. Migneault, S., A. Koubaa, H. Nadji, B. Riedl, T. Zhang, J. Deng. 2010. Medium-denisty fiberboard produced using pulp and paper sludge from different pulping processes. Wood Fiber Sci 42(3):292-303

30. Hernández, R.E., S. Kuljich, A. Koubaa. 2010. Effect of cutting width and cutting height on the surface quality of black spruce cants produced by a chipper-canter. Wood Fiber Sci 42(3):259-272

29. Bouafif, H., A. Koubaa, P. Perré, A. Cloutier. 2010. Effects of Processing Methods on wood particle development and length distribution. Wood Fiber Sci. 42(1):62-70,

28. Ngueho Yemele, M.C., A. Koubaa, A. Cloutier, P. Soulonganga, M. Wolcott. 2010. Effect of Bark Content and Size on Mechanical Properties of Bark/HDPE Composites. JCOMA 41:131–137

27. Savva, Y., A. Koubaa, Y. Bergeron, F. Tremblay. 2010. Effects of radial growth, tree age, climate, and seed origin on wood density of diverse jack pine populations. Trees 24:53-65

26. Bouafif, H., A. Koubaa, P. Perré, A. Cloutier. 2009. Effects of Fiber Characteristics on the Physical and Mechanical Properties of Wood Plastic Composites. JCOMA 40 1975-1981

25. Park Y.I., A. Koubaa, S. Brais, M.J. Mazerolle. 2009. Effects of cambial age and stem height on wood density and growth of jack pine grown in boreal stands. Wood Fiber Sci. 41(4):346-358

24. Migneault, S.,A. Koubaa, F Erchiqui, A. Chaala, K. Englund, M. Wolcott. 2009. Effect of Processing Method and Fiber Size on the Structure and Properties of WPC. JCOMA 40:80–85 CRSNG

23. Bouafif, H., A. Koubaa, P. Perré, A. Cloutier. 2009. Wood Particle/Composites: Thermal Sensitivity and Nucleating Ability of Wood Particles. Appl poly Sci. 113:593-600. .

22. Erchiqui, F., F. Godard, A. Koubaa, M. Vincent, H. Kaddami. 2009. Investigation of relaxation properties and potentiality of the thermoformability of HDPE charged by wood fibers. J. Reinforced Plastics and Composites.28(10):1153-1168.

21. Erchiqui, F., F. Godard, A. Gakwaya, A. Koubaa, M. Vincent, H. Kaddami. 2009. Engineering Investigations of Potentiality of the Thermoformability of HDPE charged by wood flours in the thermoforming part. Poly. Eng. Sci. 49 (8) :1594-1602

20. Ding, W.-D., A. Koubaa, A. Chaala, T. Belem, C. Krause. 2008. Relationship between Wood Porosity, Wood Density and Methyl Methacrylate Impregnation Rate. Wood Material Sci. and Eng.  2008; 1/2: 62-70

19. Bouafif, H., A. Koubaa, A. Cloutier, P. Perré, B. Riedl. 2008. Analysis of Among-variability in Fiber Surface Using DRIFTS and XPS. J. Wood Chem & Techn, 28: 296–315CRC, MDEIE

18. Migneault, S., A. Koubaa, F. Erchiqui, A. Chaala, K. Englund, C. Krause, M. Wolcott. 2008. Effect of Fiber Length on Processing and Properties of Extruded Wood-Fiber/HDPE Composites. J. Appl. Polymer Sci. 110:1085–1092.

17. Koubaa, A., P. Perré, R. Hucheon, J. Lessard. 2008. Complex Dielectric Properties of the Sapwoods of Aspen, White Birch, Yellow Birch and Sugar Maple. Drying Tech. 26:568-578

16. Ngueho Yemele, M.C., A. Cloutier, P.N. Diouf, A. Koubaa, P. Blanchet, T. Stevanovic. 2008. Physical and mechanical properties of particleboard made from extracted black spruce and trembling aspen bark. Forest Prod. J. 58(10):38-46.

15. Ngueho Yemele, M.C., A Koubaa, P. N. Diouf, P. Blanchet, A. Cloutier, T Stevanovic. 2008. Effects of hot water treatment of black spruce and trembling aspen bark raw material on the physical and mechanical properties of bark particleboard. Wood Fiber Sci. 40: 325-334.

14. Ngueho Yemele, M.C., P. Blanchet, A. Cloutier, A. Koubaa. 2008. Effects of bark content and particle geometry on the physical and mechanical properties of particleboard made from black spruce and trembling aspen bark.  For. Prod. J. 58(11):48-56

13. Sbiai, A., H. Kaddami, E. Fleury, A. Maazouz, F. Erchiqui, A. Koubaa, J. Soucy, A. Dufresne. 2008. Effect of the Fiber Size on the Physicochemical and Mechanical Properties of Composites of Epoxy and Date Palm Tree Fibers. Macromolecular Materials and Engineering. 293:684-691.

12. Savva, Y., Y. Bergeron, B. Denneler, A. Koubaa, F. Tremblay. 2008. Effect of inter-annual climate variations on radial growth of jack pine provenances. Can J For Res 38:619-630

11. Savva, Y.; B. Denneler; A. Koubaa; F. Tremblay; Y. Bergeron; M. Tjoelker. 2007. Seed transfer and climate change effects on radial growth of jack pine populations in a common garden in Petawawa, Ontario, Canada. For Ecol Man. 242: 636–647.

10. Koubaa, A., N. Isabel, S.Y. Zhang, J. Beaulieu, J. Bousquet. 2005. Transition from juvenile to mature wood in black spruce (Picea Mariana (Mill.) B.S.P.). Wood Fiber Sci. 37:445-455.

9. Zhang, S.Y. Yu, Qibin, G. Chauret, A. Koubaa. 2003. Selection for both growth and wood properties in hybrid poplar clones. Forest Science. 49(6):901-908.

8. Koubaa, A. S.Y. Zhang, S. Makni. 2002. Defining the transition from earlywood to latewood in black spruce based on intra-ring wood density profiles from X-ray densitometry. Ann. For. Sci. 59:511-518.

7. Koubaa, A. S.Y. Zhang, N. Isabel, J. beaulieu, et J. Bousquet. 2000. "Phenotypic correlations between juvenile-mature wood density and growth in black spruce". Wood Fiber Sci 32(1):61-71.

6. Koubaa, A., R.E. Hernández, et M. Beaudoin. 1998. "Shrinkage of Fast Growing Hybrid Poplars". For. Prod. J. 38(4):82-87.

5. Hernández, R ., A. Koubaa, M. Beaudoin, et Y. Fortin. 1998. "Selected mechanical properties of fast growing poplar hybrid clones". Wood Fiber  Sci. 30(2): 138-147.

4. Koubaa, A., R. Hernández, M. Beaudoin, et J. Poliquin. 1998. "Internal, intraclonal and within tree variation in fiber length of poplar hybrid clones". Wood Fiber Sci. 30(1): 40-47.

3. Koubaa, A., B. Riedl et Z. Koran. 1996. "Surface analysis of press dried-CTMP paper samples by ESCA", Journal of Applied Polymer Science, Vol. 61: 545-552.

2. Koubaa, A. et Z. Koran. 1995 "Measure of the internal bond strength of paper/paperboard", Tappi, 78 (3): 103-111.

1. Beaudoin, M., R. Hernández, A. Koubaa, J. Poliquin. 1992. Internal, intraclonal and within tree variation in wood density of poplar hybrid clones. Wood Fiber Sci. 24(2): 147-153.

 
 
 
 
 

Chaire de Recherche du Canada sur la Valorisation, Caractérisation et Transformation du bois